Skip links
Twitter Linkedin-in
Sign in
Sign up
RouterCoach

CISCO CCNA

  • Next Bootcamp Date: 29/07/2023
  • 06/08/2023

£600.00

The Cisco Certified Network Associate (CCNA) is a Cisco Associate-level certification program ideal for professionals who are looking to break into the world of Networking.  The CCNA is geared towards professionals who are looking to install, support, and troubleshoot both wired and wireless enterprise networks.

  • Explain the role and function of network components
  • Describe characteristics of network topology architectures
  • Compare physical interface and cabling types
  • Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)
  • Compare TCP to UDP
  • Configure and verify IPv4 addressing and subnetting
  • Describe the need for private IPv4 addressing
  • Configure and verify IPv6 addressing and prefix
  • Compare IPv6 address types
  • Verify IP parameters for Client OS (Windows and Linux)
  • Describe wireless principles
  • Explain virtualization fundamentals (virtual machines)
  • Describe switching concepts

  • Configure and verify VLANs spanning multiple switches
  • Configure and verify interswitch connectivity
  • Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)
  • Configure and verify (Layer 2/Layer 3) EtherChannel (LACP)
  • Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol and identify basic operations
  • Compare Cisco Wireless Architectures and AP modes
  • Describe physical infrastructure connections of WLAN components (AP,WLC, access/trunk ports, and LAG)

  • Interpret the components of routing table
  • Determine how a router makes a forwarding decision by default
  • Configure and verify IPv4 and IPv6 static routing
  • Configure and verify single area OSPFv2
  • Describe the purpose of first hop redundancy protocol

  • Configure and verify inside source NAT using static and pools
  • Configure and verify NTP operating in a client and server mode
  • Explain the role of DHCP and DNS within the network
  • Explain the function of SNMP in network operations
  • Describe the use of syslog features including facilities and levels
  • Configure and verify DHCP client and relay
  • Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping
  • Configure network devices for remote access using SSH
  • Describe the capabilities and function of TFTP/FTP in the network

  • Configure device access control using local passwords
  • Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, etc)
  • Describe remote access and site-to-site VPNs
  • Configure and verify access control lists
  • Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)
  • Differentiate authentication, authorization, and accounting concepts
  • Describe wireless security protocols (WPA, WPA2, and WPA3)
  • Configure WLAN using WPA2 PSK using the GUI

  • Explain how automation impacts network management
  • Compare traditional networks with controller-based networking
  • Describe controller-based and software defined architectures (overlay, underlay, and fabric)
  • Compare traditional campus device management with Cisco DNA Center enabled device management
  • Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible – with a demonstration of Ansible automation

Connect with us

Twitter Linkedin-in

Register Here

We are here to answer any question you may have. Feel free to reach via contact form.